Cadillac Escalade 2022 Owner's Manual page 274

: Press to turn the system on and
off. A white indicator appears in the
instrument cluster when cruise is
turned on.
RES+ : If there is a set speed in
memory, press the control up briefly
to resume that speed or press and
hold to accelerate. If the cruise control
is already active, use to increase
vehicle speed.
SET : Press the control down briefly
to set the speed and activate cruise
control. If the cruise control is already
active, use to decrease vehicle speed.
: Press to disengage cruise control
without erasing the set speed from
memory.
Setting Cruise Control
If is on when not in use, SET or
RES+ could get pressed and go into
cruise when not desired. Keep
when cruise is not being used.
To set cruise control:
1. Press .
2. Get up to the desired speed.
3. Press and release SET .
4. Remove your foot from the
accelerator.
When the cruise control has been set
to the desired speed, a green cruise
control indicator appears on the
instrument cluster and a cruise set
speed message appears on the Driver
Information Center (DIC) and
Head-Up Display (HUD), if equipped.
DRIVING AND OPERATING
Resuming a Set Speed
If the cruise control is set at a desired
speed and then the brakes are applied
or is pressed, the cruise control is
disengaged without erasing the set
speed from memory.
Once the vehicle speed reaches about
off
40 km/h (25 mph) or more, press RES+
up briefly. The vehicle returns to the
previous set speed.
Increasing Speed While Cruise
Control is at a Set Speed
If the cruise control system is already
activated:
Press and hold RES+ up until the
vehicle accelerates to the desired
speed, then release it.
To increase vehicle speed in small
increments, press RES+ up briefly to
the first detent. For each press, the
vehicle goes about 1 km/h (1 mph)
faster.
The speedometer reading can be
displayed in either English or metric
units. See Instrument Cluster 0 114.
The increment value used depends on
the units displayed.
273