Warnings And Cautions - ONE MK-E18 User Manual

13
USER MANUAL (MK-E18)

5. Warnings and Cautions

Cleaning
1)Do not shoot more than 30 seconds each time. If the continuous shooting time is
too long, the internal temperature will rise sharply and cause permanent damage. Af-
ter a single long-time shooting, the machines should have a short pause to cool down.
2)The spark shooting will stop automatically after 30 seconds. If users need it to
work again, please operate the second channel again.
3) Max connection is 6 pieces via power connecting cablestoo many devices work
together can cause damage or fire
4) If there is no spark out with enough consumables, it is possible that the chain is
stuck and please open the side rubber and rotate the chain manually. Please contact
after-sale service for help if it does not work.
5) After use the machines, do not immediately turn off the power. The heat-dissipat-
ing fan should take out the internal air when the power is on. Otherwise, the internal
heat is quickly transmitted to the surface of the casing.
6) Please place the equipment in an open place and keep a safe distance of more
than 5 meters from the personnel.
7) Make sure the device is off before filling the consumables
8) If the consumables are accidentally ignited, please use the sand to extinguish, do
not use water.
9) Damage caused by improper use or human factors is not covered by the warranty.
10) The final interpretation right belongs to our company.
Warning: High temperature warning, high temperature at exit.
The sign is to remind users of paying attention to risk and security.
Please note that the machines are not meant to be a continuous
duration effect. The maximum running time is 30 second and can
be repeated but should not be done to overheat the machine.
Eye protection warning sign is to remind you of protecting the
eyes during the machine operation.
Warning: Dangerous voltages are present in this machine when
electrical power is applied. There is a danger of injury from electric
shock. Under no circumstances are you to attempt to open the
machine or attempt to remove or adjust any components fitted
within the machine.
Only fully trained engineers can open the equipment.
Use caution so that any liquids do not wet the machine.
Keep the machine and controller dry and not use rainy or snowy
days unless covered.
Please inspect fountain nozzle before use and confirm whether
there are accumulation granulates.If it does, please clean out by
inverting the machine to clean out port.