Table of Contents
Advertisement
9
USER MANUAL (MK-E18)
1.Power(remote signal connect/unconnected): short press 1s con-
nect to machines, the display will show from "DMX" become to
"RF" if connected successful; long press 3s unconnected, display
show "DMX".
2.HEAT ON/OFF: after 1s do heating, red indicator will light, dis-
play will show dynamic temperature value, till green indicator al-
ways keep light on, then finished heat.
3.Press spray buttons do spray effects.
4.CLE (clear powder): Press CLE, then machine do clear powder
30s, press HEAT button if need stop. (The operation clear powder
refer to item six)
5.STOP: stop doing spray.
Consumables
1)The consumables are classified as:
SMALL: the spark fountain height 1.0-3.5m (error 0.5m), and the
spot is rarely dropped,use for indoor.
LARGE: the spark fountain height 2.0-5.0m (error 0.5m), and the
sprayed spot has dropped ground,use for outdoor.
2)Consumables choice: Consumables are the customized for-
mula for the test of our machines. Please select our consumables
to avoid affecting the effect of the machine; (No warranty service
is provided for machines damage caused by consumables not from
our company).
3)Consumables save: Consumables should be kept in a dry and
sealed environment to prevent moisture.(wet and sundry consuma-
bles should not be used)
4)Consumables add: Pls stop running the machines before add
the consumables, to avoid accidental injury.
Advertisement
Table of Contents
