Table of Contents
Advertisement
8.4.3 Auto dosing
Initial setup
Adding liquid detergents and softeners
MAX
Washing Machine / User's Manual
a) Switch on the machine by pressing the on/off button.
b) The dosing symbol (
detergent dosing.
c) If the liquid detergent and softener compartments are empty or the
remaining agents in these compartments are below the limits, the
relevant dosing symbol will flash in programmes that permit dosing.
a) Pull the detergent drawer towards yourself to open
it.
b) To add liquid detergent (left) and softener (right),
open the lid of the relevant container upwards as
shown in the image.
c) When adding liquid detergent or softener, do not
exceed the tip of the «Max» label.
d) Close the lid.
e) Close the detergent drawer by pushing it slowly.
f) After closing the detergent drawer, the flashing
dosing symbol (
g) This indicates that the components are filled and
the drawer is closed.
h) For coloured and white laundry, it is recommended
to fill commonly used liquid detergent in the
compartment.
i) Despite the fact that the detergent compartments
are filled, if detergent symbol continues to flash,
the detergent drawer is not fully closed. Ensure
that the drawer is seated in place by pushing it.
) will appear in programmes that permit
) will start to light up steadily.
EN / 25
Advertisement
Table of Contents
