Remote Start; Intelligent Programme Recommendation - Siemens WT4HXEL9DN User Manual And Installation Instructions

Table of Contents

Advertisement

16.6 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
¡ The appliance door is opened.
is pressed.
¡
is pressed.
¡
¡ The appliance is switched off.
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance is connected to your
home WiFi network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
¡ The appliance door is closed.
¡ The refresher tank is not empty.
Press
.
lights up and the appliance is
a
enabled for remote start via the
Home Connect app.
Deactivating remote start
Press
.
goes out.
a
16.7 Intelligent programme
recommendation
After you have washed your laundry
in the washing machine, the dryer will
recommend a suitable programme
for drying your laundry.
To determine the best drying
programme to use, your appliances
must transmit and receive
information. Observe the following:
¡ The washing machine must be an
appliance with the Home Connect
function.
¡ The washing machine and dryer
must be connected to your home
network and registered in your
Home Connect app.
Using the intelligent programme
recommendation
Set the
intelligentDry pro-
1.
gramme.
a The appliance detects a suitable
programme. To cancel or change
the programme recommendation,
set a different programme or
switch the appliance off.
a If the appliance finds a suitable
programme, the display for the
programme lights up.
a If the appliance does not find a
suitable programme, a signal
sounds and the display shows
"There is no particular drying pro-
gramme recommended for the last
wash programme." .
If the appliance displays additional
2.
information, confirm these notifica-
tions in the display.
a The display shows the programme
information.
Press
.
3.
Note
Why is my dryer unable to
recommend a programme?
¡ No suitable drying programmes for
the selected washing programme
on the dryer.
¡ No data is available for the last
washing programme used. The
data is stored for 24 hours and
then deleted.
¡ The washing programme has been
cancelled. The washing pro-
gramme must run through to the
end for analysis to be possible.
Home Connect en
45

Advertisement

Table of Contents
loading

Table of Contents