Table of Contents
Advertisement
Fault
Water overflows when
filling the water tank.
The laundry is too
damp.
Odours have formed
in the appliance.
Cause and troubleshooting
The water tank has been filled.
Note: The overflowing water is harmless.
Do not pour any more water into the water tank.
▶
The water tank filter is soiled.
→ "Cleaning the water tank filter", Page 52.
▶
Unsuitable programme for the type of fabric.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 30
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 30.
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable dryness level set.
→ "Changing the dryness level", Page 29.
▶
Drying target not adjusted.
→ "Adjusting the dryness level", Page 29.
▶
Load too small.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 30
Moisture sensor dirty.
→ "Cleaning the moisture sensor", Page 52.
▶
The drying process is interrupted and the condensa-
tion tank has been filled.
→ "Emptying the condensation container", Page 38.
1.
→ "Inserting the condensation container", Page 39.
2.
→ "Starting the programme", Page 36.
3.
Stubborn dirt in the appliance or an extended appli-
ance downtime of more than one month.
Run the intensive appliance care programme.
▶
→ "Appliance care", Page 47
Troubleshooting en
59
Advertisement
Table of Contents
