Table of Contents
Advertisement
en Installation and connection
4.2 Saving energy
If you follow these instructions, your
appliance will use less electricity and
less water.
Use the Eco 50° programme.
a The Eco 50° programme is en-
ergy-efficient and environmentally
friendly.
→ "Programmes", Page 18
5 Installation and con-
nection
To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.
5.1 Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note: The appliance has been tested
at the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡ Dishwasher
¡ Operating instructions
¡ Installation Instructions
¡ Further information documents
¡ Installation material
¡ Inlet hose
¡ Salt filling aid funnel
¡ Mains cable
¡ Quick reference guide
12
5.2 Installing and connecting
the appliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
Follow the safety instructions.
1.
→ Page 4
Follow the instructions for electrical
2.
connection.
Check the Scope of supply and
3.
the condition of the appliance.
Consult the installation instructions
4.
for the installation dimensions re-
quired.
Make the appliance level using the
5.
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
Install the drainage connection.
6.
→ Page 12
Install the drinking water connec-
7.
tion. → Page 13
Connect the appliance to the
8.
power supply.
5.3 Drainage connection
Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage connection
Consult the installation instructions
1.
supplied for the steps required
here.
Connect the wastewater hose to
2.
the outlet connection of the siphon
using the enclosed parts.
Advertisement
Table of Contents
