Setting Additional Functions; Setting Timer Programming; Starting The Programme; Interrupting Programme - Bosch SMS4HMB62T Information For Use

Table of Contents

Advertisement

en operation
a The remaining running time of the
programme appears on the dis-
play.
15.4 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
Press the button for the relevant
additional function.
→ "Additional functions", Page 21
a The additional function is set and
the additional function button
flashes.
15.5 Setting timer program-
ming
You can delay the start of the pro-
gramme by up to 24 hours.
Press
⁠ .
1.
a "h:01" appears in the display.
Use
to set the required start
2.
time for the programme.
Press
⁠ .
3.
a This activates timer programming.
Tip: To deactivate timer program-
ming, press
repeatedly until "h:00"
appears in the display.
15.6 Starting the programme
Press
.
a The programme has ended when
the display shows "0h:00m".
34
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 34
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
15.7 Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
⁠ .
1.
a The programme is saved and the
appliance switches off.
Press
to resume the pro-
2.
gramme.
15.8 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Press
4 seconds.
a All displays light up.
a As soon as the displays are off,
the display shows "0h:01m" and
the residual water is pumped out.
for approx.

Advertisement

Table of Contents
loading

Table of Contents