Interrupting A Programme/Adding Washing; End Of The Wash Cycle/Removing The Washing; Overdosing - AEG LAVAMAT 75805 User Information

Interrupting a programme/adding washing

Interrupting a programme
• A washing programme can be interrupted at any time by pressing the
START/PAUSE button. It is then re-started by pressing the START/
PAUSE button again.
• To stop the washing machine before the programme has ended, turn
the programme knob to OFF. Important! Be careful if there is water
in the appliance!
Adding washing
It is possible to add washing, as long as the DOOR light is lit green.
1. Press the START/PAUSE button. The door can be opened.
2. Shut the door and press the START/PAUSE button again. The pro-
gramme continues.

End of the wash cycle/Removing the washing

When the programme has finished, END will illuminate on the pro-
gramme progress display. As soon as the door indicator goes out, the
door can be opened.
1. Open the door and remove the washing.
2. Turn the programme knob to O OFF.
3. Turn off the tap.
4. When you have finished washing, pull out the detergent drawer a little
to let it to dry out. Keep the door very slightly open so that the washing
machine can air.
If ù (NIGHT CYCLE) was selected:
Following a night cycle END will illuminate in the programme progress
display.
– To spin, turn the programme knob to O OFF and then to SPIN or
DELICATE SPIN. Change the spin speed, if necessary, and press the
START/PAUSE button (the washing is spun).

Overdosing

3
If the OVERDOSING indicator is lit, too much detergent was used in the
previous programme. The next time you wash, observe the dosing rec-
ommendations of the detergent manufacturer and the load sizes.
17