Table of Contents
Advertisement
Fig. 8.5
Electrical Supply Connection
Connect the appliance to the electrical supply (220-240 V ~
50 Hz) with the plug and lead, which are fitted.
Connections to the mains supply should be in accordance
with local regulations.
Warning! This appliance must be earthed.
n
The mains lead of this appliance has been fitted with
n
a specially earthed plug.
Important: Do not use the appliance without the
n
fuse cover in position. Should the fuse need to be
replaced, it must be replaced with a 13A fuse, ASTA
approved to BS1362.
The plug must be used with a specially earthed
n
socket of 13 amperes. If there is no such socket
in your house, please have one installed by an
authorised electrician.
The mains lead of this appliance has been fitted with a BS
1363A 13A fused plug. To change a fuse in this type of plug,
follow the steps below:
1.
Remove the fuse cover and fuse.
2.
Fit replacement 13A fuse, ASTA approved to BS 1362
type, into the fuse cover.
3.
Replace fuse cover.
20
Advertisement
Table of Contents
