Table of Contents
Advertisement
2.2 Responsibility of the customer
In addition to the health and safety instructions in this operating manual, one must adhere to
the safety, accident prevention, and environmental protection guidelines for the region in which
the equipment is used. Particularly applicable in this regard:
•
The customer must be familiar with the applicable health and safety
provisions and in a hazard analysis identify other hazards that may
exist at the equipment's installation site due to the special working
conditions.
•
The customer must clearly regulate and specify responsibilities
for installation, operation, maintenance and cleaning.
•
The customer must ensure that all personnel who handle the equipment
have fully read and understood the operating manual.
•
In addition, at regular intervals, the operator must train personnel and
inform them of the hazards of working with the equipment.
Moreover, the customer is responsible for ensuring that the equipment is always in technically
faultless condition. Consequently, the following applies:
•
After each use, and at least once a year, a visual inspection of the
equipment must be carried out by a trained individual (according to
DGUV Grundsatz 305-002 or country-specific guidelines).
•
Every three years, or if you have doubts about the safety or reliability
of the equipment, functional testing and stress testing must be carried out
(according to DGUV Grundsatz 305-002 or country-specific guidelines).
Safety | 9
Advertisement
Table of Contents
