Table of Contents
Advertisement
8 Service
8.1
Safety information
WARNING!
Risk of injury due to improperly performed maintenance work!
Improper maintenance of the equipment can cause serious injury
or material damage.
Therefore, make absolutely sure to:
»
»
»
8.2
Care and maintenance
In the interest of permanent operational readiness, the following measures are
essential:
•
Each time the device is subjected to a load, but at least once a year,
the equipment and the accessories must be visually inspected.
Special attention must be paid to spreader tips, joints, blades, hoses,
and coupling halves.
•
Every three years, or if there are doubts about the safety or reliability
of the equipment, functional testing and stress testing must also be
carried out (according to DGUV Grundsatz 305-002 or country-specific guidelines).
•
After every loading, the lubrication of the movable parts
and pins must be inspected and sprayed with a suitable grease.
•
Every three years, the complete hydraulic oil of the spreader must be replaced.
Only let qualified personnel carry out maintenance work.
Make sure the installation site is organised and clean! Loose
components and tools lying around are sources of danger.
Wear protective gloves for all work!
Service | 35
Advertisement
Table of Contents
