Table of Contents
Advertisement
[First On]
After booting, the initial screen displays the home screen or the connected input source screen.
Options : [Home], [Source]
•
[Home] : Display the home screen.
•
[Source] : Displays the connected HDMI screen.
[Simplink]
Enables interoperability between HDMI connected devices.
[Screensaver]
Press the remote control
operation is performed for 1 minute on the home screen, the screensaver is opened.
[No Signal Standby]
Press the remote control
display will enter standby.
Options : Off, 5 Min,10 Min, 30 Min, 60 Min, 240 Min
[Auto Standby]
Press the remote control
update the UI screen within the set time, the device will automatically stand by.
Options : Off, 240 Min
[Timed Shutdown]
Press the remote control
even if there is a key input, the time will not be updated.
Options : Off, 30 Min, 60 Min, 90 Min, 240 Min
[Rest Notification]
Press the remote control
have been watching for %1$d hours in a row. Take a break!] will be displayed.
Options : Off, 1 Hr, 2 Hrs, 3 Hrs
/
key to select [Screensaver] mode, the screensaver can be turned on/off. If no
/
key to select [No Signal Standby] mode, if no source signal is active in set time,the
/
key to select [Auto Standby] mode, if you do not operate the remote control or
/
key to select [Timed Shutdown] mode, automatically standby after setting the time,
/
key to select [Rest Notification] mode, after the set time, the prompt word [You
35
Advertisement
Table of Contents
