Sferalabs Iono Pi RTC Quick Reference

Iono Pi Quick Reference
September 2018
Revision 006
IPBB13X Iono Pi board
IPBB13R Iono Pi RTC board
IPMB13X Iono Pi with Raspberry Pi 3 Model B
IPMB13R Iono Pi RTC with Raspberry Pi 3 Model B
IPMB13XP Iono Pi with Raspberry Pi 3 Model B+
IPMB13RP Iono Pi RTC with Raspberry Pi 3 Model B+
Be sure to always remove the power supply before connecting or
disconnecting the Iono Pi board to Raspberry Pi. In order to meet the
relevant CE requirements, Iono Pi must be operated fully enclosed in its
DIN-rail case. Follow all applicable electrical safety standards,
guidelines, specifications and regulations for installation, wiring and
Carefully and fully read the Iono Pi user guide before installation.
Iono Pi is not authorised for use in safety-critical applications where a failure of the product
would reasonably be expected to cause personal injury or death. Safety-critical
applications include, without limitation, life support devices and systems, equipment or
systems for the operation of nuclear facilities and weapons systems. Iono Pi is neither
designed nor intended for use in critical military or aerospace applications or environments
and for automotive applications or environment. Customer acknowledges and agrees that
any such use of Iono Pi is solely at Customer's risk, and that Customer is solely
responsible for compliance with all legal and regulatory requirements in connection with
Sfera Labs S.r.l. may make changes to specifications and product descriptions at any time,
without notice. The product information on the website or materials is subject to change
Strato and Sfera Labs are trademarks of Sfera Labs S.r.l. Other brands and names may be
Copyright © 2015-2018 Sfera Labs S.r.l. All rights reserved.
operations of Iono Pi.
such use.
without notice.
claimed as the property of others.
http://www.sferalabs.cc
Page 1 of 8