Sferalabs iono MKR Quick Reference

Iono MKR Quick Reference
August 2021
Revision 004
IMMS13X Iono MKR
IMMS13R Iono MKR with RTC
IMMS13S Iono MKR with RTC and Secure Element
Be sure to always remove the power supply before installing or
removing the Arduino board inside Iono MKR.
Iono MKR must be operated with the plastic case installed.
Follow all applicable electrical safety standards, guidelines,
specifications and regulations for installation, wiring and operations of
Iono MKR modules.
Carefully and fully read this Iono MKR user guide before installation.
Iono MKR is not authorised for use in safety-critical applications where a failure of the
product would reasonably be expected to cause personal injury or death. Safety-critical
applications include, without limitation, life support devices and systems, equipment or
systems for the operation of nuclear facilities and weapons systems. Iono MKR is neither
designed nor intended for use in military or aerospace applications or environments and
for automotive applications or environment. Customer acknowledges and agrees that any
such use of Iono MKR is solely at Customer's risk, and that Customer is solely responsible
for compliance with all legal and regulatory requirements in connection with such use.
Sfera Labs S.r.l. may make changes to specifications and product descriptions at any time,
without notice. The product information on the web site or materials is subject to change
without notice.
Iono and Sfera Labs are trademarks of Sfera Labs S.r.l. Other brands and names may be
claimed as the property of others.
Copyright © 2018-2021 Sfera Labs S.r.l. All rights reserved.
http://www.sferalabs.cc
Page 1 of 8