Table of Contents
Advertisement
Suspension
Rear Suspension Spring Pre-load
Rear spring pre-load can be easily increased or decreased using the rear spring
pre-load switch on the left front fairing. Then you can comfirm the pre-load
position with the multi-display.
This electric rear spring pre-load adjustment system functions only when the
ignition switch is ON or ACC, your motorcycle is stopped, and the transmission
is in neutral. (When the reverse indicator is ON, the system will not function.)
The spring pre-load system has 26 positions (from 0 to 25) for different road or
riding conditions. (Standard position is 0.)
Adjustment
1.
Place the motorcycle on its center stand on a firm, level surface. To prevent
discharging the battery, make sure the audio system and other electrical
accessories are off.
2.
Turn the ignition switch to ON or ACC.
3.
Push the DOWN or UP side of rear spring pre-load adjustment switch until
the desired pre-load is reached.
To increase (HIGH)
To decrease (LOW)
144
Servicing Your Honda
MEMO button
rear spring pre-load adjustment switch
Advertisement
Chapters
Table of Contents
