Proper Use; Technical Data; Before Starting The Equipment - EINHELL TE-VC 2230 SA Operating Instructions Manual

29. Air regulator
30. 4 x Washers for fi tting the wheels
31. 2 x Split pins for fi tting the wheels
32. 2 x Covers for fi tting the wheels
33. Axle for fi tting the wheels
34. 2 x Screws for fi tting the handle
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Pleated filter with cover
•
Suction tube
•
Handle
•
Castors
•
2x Covers for fitting the wheels
•
Axle for fitting the wheels
•
Hook for cable store
•
2x Washers for fitting the wheels
•
2x Split pins for fitting the wheels
•
2x Screws for fitting the handle
•
Wheels
•
Original operating instructions
Anl_SA_TE_VC_2230_SA_SPK8.indb 15 Anl_SA_TE_VC_2230_SA_SPK8.indb 15
GB

3. Proper use

The wet and dry vacuum cleaner is designed
for wet and dry vacuuming using the approp-
riate fi lter. The appliance is not suitable for the
vacuuming of combustible, explosive or harmful
substances.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

See warranty card of your country.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
Fitting the wheels (Fig. 4-11/13)
Place a split pin for fi tting the wheels (31) through
the appropriate hole in the axle (33) and fi t a
washer (30) and a wheel (13) to the axle (33)
(Fig. 5-6). Now slide the axle (33) through the
guides provided for it on the underside of the
tank (10) (Fig. 7). Fit the second wheel (13) to
the empty end of the axle (33) and secure it with
the other washer (30) and the split pin (31) (Fig.
8-10). Push the covers (32) on to the outside of
the wheels (13) so that the detents engage on the
covers (32) for the wheel (13). (Fig. 11).
Fitting the castors (Fig. 12/12)
Fit the castors (12) into the appropriate moun-
tings on the underside of the tank (10). Push the
castors (12) fi rmly into the mounting until they
engage with a clicking noise (Fig. 12).
- 15 -
18.05.16 13:37 18.05.16 13:37