Table of Contents
Advertisement
Wireless
Bluetooth
Wireless Device Enable
WLAN
Bluetooth
Table 38. System setup options—POST Behavior menu
POST Behavior
Numlock Enable
Enable Adapter Warnings
Extend BIOS POST Time
Fastboot
Fn Lock Options
Lock Mode
Pull Screen Logo
Warnings and Errors
Table 39. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
VT for Direct I/O
Table 40. System setup options—Maintenance menu
Maintenance
Asset Tag
Service Tag
34
System setup
Default: ON.
Enable or disable internal WLAN/Bluetooth devices.
Default: ON.
Default: ON.
Enables or disables Numlock when the computer boots.
Default: ON.
Enables the computer to display adapter warning messages during boot.
Default: ON.
Configures the BIOS POST (Power-On Self-Test) load time.
Default: 0 seconds.
Configures the speed of the UEFI boot process.
Default: Thorough. Performs complete hardware and configuration initialization during
boot.
Enables or disables the Fn lock mode.
Default: ON.
Default: Lock Mode Secondary. Lock Mode Secondary = If this option is selected, the
F1-F12 keys scan the code for their secondary functions.
Enabled or disabled the computer to display full screen logo if the image match
screen resolution.
Default: OFF.
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt and wait for user input when
warnings or errors are detected.
NOTE:
Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Enables the computer to run a virtual machine monitor (VMM).
Default: ON.
Enables the computer to perform Virtualization Technology for Direct I/O (VT-d).
VT-d is an Intel method that provides virtualization for memory map I/O.
Default: ON.
Creates a system Asset Tag that can be used by an IT administrator to uniquely
identify a particular system. Once set in BIOS, the Asset Tag cannot be changed.
Displays the Service Tag of the computer.
Advertisement
Table of Contents
