Sunbeam App Functionality - Sunbeam IMCNT-D User Manual

Controlling Your Bedding

Sunbeam App Functionality

The Sunbeam App has the same functionality as the wired controller, as well as additional features.
®
Power:
1. Turn on/off the heated bedding product by pressing the "
Confirm Your Presence Feature:
Note:
If you turn on the bedding through the app, you will need to press the
within 1 hour to confirm your presence, otherwise, the heat setting will be lowered to Level 4 if set at level 5 or above.
A reminder will appear in the app when the product is first turned on remotely. Additional reminders will
appear in the app 15 minutes before the 1-hour window has elapsed and after the 1-hour window has
passed.
1. Press the " " button to confirm your presence. The light will stop pulsing after the button has been
pressed.
Heat Settings: Choose which of 10 heat settings is the right heat level for you.
1. Slide your finger down on the heat setting scroll wheel to increase the heat setting.
2. Slide your finger up on the heat setting scroll wheel to decrease the heat setting.
Note: Your wired controller display will change to match the setting selected in the app.
Preheat: The preheat function will heat the bed on high setting for 30 minutes and after will return to the last
heat setting.
1. Press Preheat "
Selecting Sides *(On Queen/King Models Only)*
1. Select which side of the bedding to control by choosing "Side A" or "Side B" at the top of the app screen.
The side that is selected will be highlighted in red.
2. Select "Both" to control both sides together. The settings on the side that is selected prior to pressing
"Both" will now be the setting for both sides.
3. To control the sides independently again, select the side you wish to control or press the "Both" button
again.
Note:
- If the side that is selected is off and the "Both" button is pressed, the settings from the side that is on
will be the setting for both sides.
- You can use the power, preheat, and timer settings while both sides are selected.
For questions or support, please visit www.sunbeamhome.com
" button to turn on/off this feature.
" button.
" "
button on your wired controller
E9