Using The Sunbeam App - Sunbeam IMCNT-D User Manual

Connected heated bedding

Hide thumbs

Table of Contents

Available languages

Controlling Your Bedding

Manual AP (Access Point/Hotspot) Pairing

Utilize this method if the Auto Pairing is unsuccessful

1. Firmly connect the controller into the bedding and then plug it into a 120V AC outlet.

2. Download the Sunbeam app from Google Play or the Apple App Store.

3. Create an account by inputting your email address.

4. Enter the verification code you were sent to confirm your account and then create a password.

5. Ensure that Bluetooth is activated on your mobile device.

6. Add your new connected bedding by selecting "Add Device" or "+" in the upper right hand corner. A pop

up will appear and select "Do not add". Then Select the heated bedding icon that corresponds to the size

of your bedding.

7. The connection mode option in the top right corner of the screen should indicate AP Mode. If not, select

AP Mode from the drop down list.

8. Power on the controller.

9. Press and hold the "

on the wired controller begins to flash continuously. Then press "Next" within the app.

10. Input your Wi-Fi network name and password to pair your device.

IMPORTANT: Network name and password are case sensitive. Please be sure to input your network name

and password exactly as shown on your router, including spaces, dashes, and special characters.

11. Next you will be asked to connect to the SL-Sunbeam hotspot.

12. Press the "Go to Connect" button which will direct you to your Wi-Fi options in your settings.

13. Choose "Sunbeam-XXXX" (The last four digits may vary).

14. Navigate back to the Sunbeam App to resume the set up process.