Basic User Tasks - Honeywell 04230-A-1001 Technical Handbook

Searchline excel infrared gas detectors
Table of Contents

Advertisement

MAN0530 Issue 15 - 07/17
2104M0506
APPENDIX A - HANDHELD INTERROGATOR
A.4 BASIC USER TASKS
Switching On
(1)
Press
for two seconds.
The unit recalls its previously set operating mode, i.e. EXCEL, OPTIMA or OPTIMA
PLUS, and displays the following message for approximately three seconds:
The unit then displays the top level of the menu style interface in the following way:
During use the first line of the display shows the current level in the menu tree.
The second line displays the sub menu title, action to be invoked, or data value to be
checked/changed.
Note: To change the operating mode at switch-on, e.g. from OPTIMA to EXCEL, press the
ESC key whilst the initial message is displayed. This changes the mode and re-displays
the message.
Switching Off
(1)
Select the Power Off option from the Main Menu,
Alternatively press the
Notes:
1.
The unit powers down automatically after five minutes of non-use.
2.
The fast power off facility and auto power off are disabled when a menu option is selected
that modifies the interrogator's configuration.
To replace the battery in the Hand-Held Interrogator SHC-1 proceed as follows:
ONLY USE DURACELL MN1604 TYPE 6LR61
(1)
Remove the Interrogator from its protective pouch.
(2)
Using a 2.5mm allen hexagonal key, loosen the four screws on the rear cover of the
Interrogator.
Z - SHC1 EXCEL
Interrogator 4V0
Main
Display
and ESC buttons simultaneously for a fast power off.
CAUTION
Only use batteries specified below.
Replace the battery only in a Safe Area.
88
Searchline Excel

Advertisement

Table of Contents
loading

Table of Contents