Building Performance Tension; Playing With A Rhythm Backing; Rhythm; Playing A Rhythm - Casio Casiotone CT-S195 User Manual

Building Performance Tension

While pattern play is in progress, you can use the build-up
function to apply dance music effects and build up tension.
Function
Description
Name
PITCH Each press of a keyboard key
changes the overall pitch of the
song. Pressing the PITCH
DOWN key lowers the pitch in
semitone units, while PITCH UP
raises the pitch in semitone units.
CHANGE Instantly changes the pattern
phrase of the current song.
ROLL Cuts out part of a song, repeats
it, and applies fine performance
effects.
FILTER Applies effects that make notes
darker (by cutting high-range
frequencies) or brighter (by
cutting low-range frequencies).
GATE Applies an effect that finely
chops a song.
ENDING Ends the current song while
applying various effects.
*1 Depending on the part, some pattern phrases are not
changed.
*2 How an effect is applied changes randomly with each
keyboard key press. Effects are applied for a fixed amount
of time.
*3 While Dance Music Voice is enabled, automatically plays
back the effect along with the Voice Tone.
• Build-up execution timing is the beat immediately after a
keyboard key is pressed.
• Though effects and build-up functions can be used at the
same time, the effect currently being executed may stop.
• The display shows the applicable function name while a
build-up function is being used.
• If the ENDING effect is used, Dance Music play stops after
the effect is complete.
• If the pattern phrase is changed while the ENDING effect is
being applied, play of only the newly selected part
continues without stopping after the effect is complete.
Playing with a Rhythm
Backing
You can use the procedures in this section to select the
rhythm you want, and then automatically play
Remarks
accompaniments to suit it simply by playing chords with your
left hand. It's like having a personal backup group along with
1
*
you wherever you go.
• Auto Accompaniments are made up of the parts
(instruments) below.
– Rhythm (percussion)
1
*
– Bass (bass instruments)
– Harmony (other instruments)
2
*
You can have only the rhythm part play, or you can have all
3
*
three parts play at the same time.
2
*

Rhythm

3
*
The rhythm part is the foundation of each Auto
Accompaniment. Your Digital Keyboard comes with a variety
of built-in rhythms, including 8-beat and waltz. Use the
2
*
procedure below to play the basic rhythm part.
3
*
2
*

Playing a Rhythm

* 3
1.
Press HOME.
This displays the home screen.
2.
Press the RHYTHM button.
This displays the [RHYTHM] screen, which shows the
currently selected rhythm number and name.
• Changing the rhythm while the metronome is sounding, or
while song or Dance Music Mode play is in progress will
cause the ongoing operation to stop.
3.
Rotate the dial to select a rhythm.
This causes the category name to appear on the display.
• For information about rhythm types, see the
List" (page EN-44).
• After you rotate the dial once to select an option, you
also will be able to change the selection using the –
and + buttons.
• To go back to the previous screen, press the BACK
button.
EN-23
"Rhythm