Indicators
Indicator
Name
U.S.
Parking Brake
and Brake
Canada
System Indicator
(Red)
(Red)
U.S.
Brake System
Indicator
Canada
(Amber)
(Amber)
74
On/Blinking
Comes on for a few seconds when
●
you set the power mode to ON,
then goes off.
Comes on when the parking brake
●
is applied, and goes off when it is
released.
Comes on when the brake fluid
●
level is low.
Comes on if there is a problem
●
with the brake system.
The beeper sounds and the
●
indicator comes on if you drive
with the parking brake not fully
released.
Comes on for a few seconds when
●
you set the power mode to ON,
then goes off.
Comes on if there is a problem
●
with the cooperative control with
regenerative braking, the brake
override system, or the hill start
assist system.
Explanation
Comes on while driving - Make sure
●
the parking brake is released. Check the
brake fluid level.
2 What to do when the indicator
comes on P. 435
Comes on along with the brake
●
system indicator - Immediately stop in a
safe place. Contact an authorized Honda
Accord Plug-In dealer for repair. The
brake pedal becomes harder to operate.
Depress the pedal further than you
normally do.
Comes on along with the ABS
●
indicator - Have the vehicle checked by
an authorized Honda Accord Plug-In
dealer.
2 If the Brake System Indicator (Red)
Comes On P. 435
Stays on constantly - Avoid high speeds
●
and sudden braking. Take the vehicle to
an authorized Honda Accord Plug-In
dealer immediately.
Message