Replacing Light Bulbs - Honda Accord Hybrid 2014 Manual

Replacing Light Bulbs

Headlight Bulbs
When replacing, use the following bulbs.
High beam headlight: 60 W (HB3 for halogen bulb type)
Low beam headlight: LED type
■
High Beam Headlight
Holding
Clips
386
Passenger side
1. Unlock the holding clips, then remove the
upper part of the air intake duct.
2. Remove the engine coolant reservoir.
1Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the trunk, have the aiming readjusted
at an authorized Honda Accord Plug-In dealer or by a
qualified technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
The exterior lights' inside lenses (headlights, brake
lamps, etc.) may fog temporarily after a car wash or
while driving in the rain. This does not impact the
exterior light function.
However, if you see a large amount of water or ice
accumulated inside the lenses, have your vehicle
inspected by an authorized Honda Accord Plug-In
dealer.