Mazda CX-5 2012 Manual page 254

Interior Features
Audio System
qOperating the Radio
Audio button
Radio ON
Press the audio button (
the on-screen tab.
Band selection
Touch the
the band as follows:
FM1→FM2→AM
NOTE
is displayed when FM1 is selected,
l
is displayed when FM2 is
selected, and
is selected.
If the FM broadcast signal becomes weak,
l
reception automatically changes from
STEREO to MONO for reduced noise, and
the "STEREO" indicator will no longer
display.
Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be erased.
5-40
) and touch
on-screen tab to switch
is displayed when AM
Manual tuning dial
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
NOTE
When an
received, a receivable multicast channel is also
received.
Seek tuning
Pressing the seek tuning button (
will cause the tuner to seek a higher or
lower frequency automatically.
NOTE
If you continue to press and hold the seek
l
tuning button (
continue changing without stopping.
When an
l
received, a receivable multicast channel is
also received.
Seek tuning buttons
broadcast is being
,
, ) the frequency will
broadcast is being
)