2.
Disengage the PTO, move the motion-control
levers to the N
EUTRAL
engage the parking brake.
3.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4.
Change the engine oil as shown in
Figure 41
5.
Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
42).
-
position, and
LOCK
Figure
41.
(Figure
g031514
6.
Start the engine and drive to a flat area.
7.
Check the oil level again.
g027660
33
Figure 42
g027660