2.2 De camera installeren aan muur/plafond............5 2.3 Connecting the camera to your network using a network cable ......5 2.3.1 Option 1 Power adapter is plugged near the EM6355......... 6 2.3.2 Option 2 Power adapter is plugged near the router/modem/switch....7 2.4 Installing the CamLine Pro App on an Apple/Android device ......
Congratulations with the purchase of this high-quality Eminent product! This product has undergone extensive testing by Eminent’s technical experts. Should you experience any problems with this product, you are covered by a five-year Eminent warranty. Please keep this manual and the receipt in a safe place.
1.2 Requirements to access the camera. It is very easy to access the video images of the EM6355 on your smartphone, tablet or PC. You only need the ID or QR code that is displayed on your bottom label and download the application for your device.
2.3 Connecting the camera to your network using a network cable We advise to connect the camera first with a network cable. Once the camera works correctly, you can use your wireless network. You will need the following components to connect your EM6355 to your network.
5. Connect the Power + Ethernet plug from the EM6355 to the “RJ45 coupler”. Note: If you wish to use the EM6355 wirelessly you will need to remove the Ethernet cable between the router/modem/switch and the Splitter cable after successfully...
4. Connect the other end of the Ethernet cable to the “RJ45 coupler”. 5. Connect the Power + Ethernet plug from the EM6355 to the “RJ45 coupler”. Warning: Do NOT connect the Splitter Cable as illustrated below this will damage your router/modem/switch.
ENGLISH 2.5 Installing the CamLine Pro App on an Apple/Android device 1. Open “CamLine Pro”. 2. Select the “+” (A). 3. Select “Add camera”. 4. Choose for option 1 or 2 (B) the option that matches the best with your setup situation and press “Add camera”.
10. To add the camera manually enter the camera ID located on the ID/password card (proceed with step 13). 11. If the computer and the EM6355 is connected to the same network, the Camera can be added by clicking “LAN search”.
ENGLISH 2.7 Adding the camera to a wireless network There are 2 options to connect the EM6355 to your wireless network. First option is to configure the settings by using the APP settings and the second option with the PC (Windows) software settings.
11 | ENGLISH 10. Enter the wireless encryption key and press “Connect” 11. To activate the WiFi connection disconnect the Ethernet cable. 2.7.2 Connecting to WiFi using the PC utility (windows). 1. Ensure the camera is connected to the network with a Ethernet cable, and your smartphone is connected to the same network.
Page 12
12 | ENGLISH 6. Go to the Menu option “Wi-Fi setting” 7. Click “Search” to search for available wireless networks. 8. Select the WiFi connection you wish to connect your camera to (if the camera is recently restarted please be patient and wait for the Wireless connection to be displayed by repeatedly pressing “Search”).
13 | ENGLISH 9. Enter the Encryption settings and the WPA-PSK key of the wireless network 10. Click “Apply”. 11. Disconnect the Ethernet cable to connect to the wireless network. 3.0 Viewing images You can view the images both on your computer and on your smartphone screen, as we explain in the sections below.
14 | ENGLISH 4.0 CamLine Pro for iPhone/iPad/Android 4.1 The Layout of CamLine Pro Menu Add camera Android 4.2 Menu of the app Camera list App information Android...
16 | ENGLISH Press the currently displayed stream to get more options Option overview (swipe to the left to view all available options) Mute Record video (locally) Take snapshot (locally) Change video quality Manage camera presets Mirror horizontally Mirror vertically Change the environments frequency Optical zoom + (only available for certain models) 10.
17 | ENGLISH 1. Select a different camera 2. View recordings stored on the SD-card 3. View recordings stored locally 4. Camera settings 5. Remove camera from overview 4.4.1 Select a different camera Using this option you can select a different camera from the camera list to display in the overview.
20 | ENGLISH 4.6 Advanced settings The settings of the camera are available in the menu option “Advanced settings”. 4.6.1 Camera password Here you can change the password of the camera. Set new password 4.6.2 Time zone settings Here you can change the time zone settings and DST (summertime). Select time zone Enable DST (summertime)
21 | ENGLISH 4.6.3 WiFi Here you can set the WiFi settings for your CamLine Pro camera to connect to your WiFi Router/AP. Select WiFi network Enter WiFi password 4.6.4 Alarm settings Manage the Alarm settings. Enable/disable the motion detector. Select the event after an event has been triggered.
Page 22
22 | ENGLISH Select a Camera preset to point the Change the sensitivity of the camera at after an event. motion detector. Android Set the motion detect sensitivity Configure the phones notification to silent, ringtone, vibrate or Ringtone and vibrate.
23 | ENGLISH Select a preset for the camera to Set what the camera should do on an alarm go to if motion is detected. event: send e-mail, save snapshot to FTP server, save video to FTP server 4.6.5 FTP settings Set the FTP server settings for the camera to store the snapshots and recordings after an alarm is triggered.
Set the server settings for your e-mail server for the camera to be able to send an e- mail on an alarm event. Eminent has added popular e-mail servers to the predefined SMTP server list. If you wish to use one of the following email providers you can use the “>” at the server option and select the corresponding mail provider from the list.
25 | ENGLISH Pre-defined e-mail providers to choose from The server settings will be entered you still need to enter the displayed sender address, your e-mail user account, password and the recipient e-mail address and press “OK” If the e-mail provider is not listed you will need to set the server settings manually. Enter the e-mail providers SMTP Select the corresponding e-mail settings.
Page 26
26 | ENGLISH The following recording settings are available: 1. Format SD card: The SD card will be formatted (all data and recordings will be erased). 2. Alarm: The camera will start recording to the SD-card on an alarm event (Motion detection needs to be enabled).
27 | ENGLISH 5.0 CamLine Pro PC software 5.1 The overview of the CamLine Pro PC software 10 11 12 13 14 15 18 19 22 23 24 25 4 16 17 20 21 1. Camera list 18. Horizontal mirroring 2.
28 | ENGLISH 5.2 Software settings 5.2.1 Software settings • Run at startup (Software will start automatically after Windows is started). • Use last viewed streams at startup (Show the last viewed streams at startup) • Exit to verify identity •...
30 | ENGLISH 5.3.3 Alarm Change the settings and events on an alarm event and press “Apply” FTP settings Set the settings for a FTP server for the camera to be able to save the snapshots or recordings to the FTP server on an alarm event. Example of a FTP server address: ftp.server.com E-mail settings...
32 | ENGLISH 5.3.6 Device settings Pan/Tilt: Change the settings for the Pan/Tilt feature Network: Here you can set the network settings of the camera manually.
Page 33
33 | ENGLISH SD card: Set the recording settings for the SD card. Playback recordings on the SD card and format the SD card. The following options are available: Alarm recording: Starts recording if movement is detected Full time recording: Will record continuously No recording: No recording Format SD: The SD card will be formatted (all data and recordings will be deleted from the SD card).
Page 34
34 | ENGLISH ONVIF: Change the Onvif settings (Open Network Video Integration Forum) The ONVIF specification defines a common protocol for the exchange of information between network video devices including automatic device discovery, video streaming and intelligence metadata.
Page 35
35 | ENGLISH Video quality: Change video settings...
36 | ENGLISH 5.4 Playback local recordings Open the Playback feature by pressing the button. In this part you can playback the recordings stored on your PC. 1. First make sure the camera(s) you wish to playback is selected (double click the camera or drag and drop the camera in an available screen).
Page 37
37 | ENGLISH 8. The recording will be played in the selected frame. Playback function bar: 7 8 9 10 11 12 13 14 1. Play 2. Stop 3. Next 4. Stop all 5. Mute 6. Volume 7. Snapshot 8. Clear selection 9.
6. Vertical patrol 6.0 The webpage of the camera The Eminent camera is also an IP camera with its own webpage. This means you can login to the webpage by using the camera’s IP Address. Use the following steps to login to the webpage and change any of the camera settings.
3. Enter the IP address in the address bar of your web browser followed by : and port number e.g. 192.168.100.101:443 (the PC software will display the default port 81 but the default port for the EM6355 is port 443) 4. Choose the corresponding option matching your internet browser 5.
40 | ENGLISH 6.3 FTP setting Optionally set your FTP server in this setup menu. Example of a FTP server address: ftp.server.com 6.4 Alarm settings In this setup menu you can you can determine what should happen if an alarm event is triggered.
The latest Frequently asked questions for your product can be found on the support page of your product. Eminent will update these pages frequently to assure you have the most recent information. Visit www.eminent-online.com for more information about your product.
A power socket is needed which should be close and easy accessible from the device. Repairing of the device should be done by qualified Eminent staff. Never try to repair the device yourself. The warranty immediately voids when products have undergone self-repair and/or by misuse.
Eminent warranty. Products are not covered by the Eminent warranty when exposed to incorrect/improper use, external influences or when opening the service parts of the product by parties other than Eminent.
Need help?
Do you have a question about the EM6355 and is the answer not in the manual?
Questions and answers