Asus ROG STRIX Z490-E Manual page 43

Intel(R) Speed Shift Technology
This item allows you to disable or enable Intel(R) Speed Shift Technology support.
When enabled, CPPC v2 interface allows hardware controlled P-states.
Configuration options: [Auto] [Enabled] [Disabled]
Intel(R) Turbo Boost Max Technology 3.0
This item allows you to disable or enable Intel(R) Turbo Boost Max Technology 3.0
support.
Configuration options: [Enabled] [Disabled]
The following item appears only when Intel(R) Turbo Boost Max Technology 3.0 is set
to [Enabled].
Runtime SMM Polling
This item allows you to set the timer for runtime polling periodic SMM to
check favored max ratio (PerCore) if updated by reading overclocking
mailbox command 0x1C.
Configuration options: [Disabled] [16 mSec] [32 mSec] [64 mSec] [8 Sec]
[16 Sec] [32 Sec] [64 Sec]
Turbo Mode
This item allows you to automatically set the CPU cores to run faster than the base
operating frequency when it is below the operating power, current and temperature
specification limit. (Requires EMTTM enabled too)
Configuration options: [Enabled] [Disabled]
CPU C-states
This item allows you to set the power saving of the CPU states.
Configuration options: [Auto] [Disabled] [Enabled]
The following items appear only when CPU C-states is set to [Enabled].
Enhanced C-States
When enabled, CPU will switch to minimum speed when all cores enter
C-State.
Configuration options: [Enabled] [Disabled]
CPU C3 Report
This item allows you to disable or enable the CPU C3 report to the
operating system.
Configuration options: [Enabled] [Disabled]
CPU C6 Report
This item allows you to disable or enable the CPU C6 report to the
operating system.
Configuration options: [Enabled] [Disabled]
CPU C7 Report
This item allows you to disable or enable the CPU C7 report to the
operating system.
Configuration options: [CPU C7] [CPU C7s] [Disabled]
ROG STRIX Z490-E BIOS Manual 43