BMW F800GT Rider's Manual page 80

Phase 2
7
The 'General' warning light
changes from yellow to red.
78
Phase 3
The rev. counter and speedo-
meter needles both swing to
the starting position on their
scales. At the same time, all the
warning lights and telltale lights
z
switched on in the initial phase
are switched off in reverse se-
quence.
The malfunction indicator lamp
only goes out after 15 seconds.
If a needle did not move or if a
warning light or telltale light did
not show:
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ABS self-diagnosis
BMW Motorrad ABS performs
self-diagnosis to ensure its op-
erability. Self-diagnosis is per-
formed automatically when you
switch on the ignition. The mo-
torcycle has to move forward a
few metres for the wheel-speed
sensors to be tested.
Phase 1
Test of the diagnosable system
components with the vehicle at a
standstill.
ABS telltale and warning
light flashes.
Phase 2
Test of the wheel-speed sensors
as the vehicle pulls away from
rest.
ABS telltale and warning
light flashes.
ABS self-diagnosis
completed
The ABS telltale and warning
light goes out.
Check all the telltale and warn-
ing lights.
After the ABS self-diagnosis
completes, an indicator show-
ing an ABS fault will appear.
You can continue to ride. Bear
in mind that the ABS function
is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ASC self-diagnosis
with Automatic Stability Control
(ASC) OE
BMW Motorrad ASC performs
self-diagnosis to ensure its op-
erability. Self-diagnosis is per-