Mount Installation - iOttie iTap 2 Wireless Manual

Mount Installation

Please use caution when adjusting the twist lock on air vent blade.
Do not apply excessive pressure to twist lock as this may damage the blades.
iOttie is not liable for damages due to product misuse.
1. Open twist lock and push mount
completely onto vent blade.
3. Plug micro USB into the charging mount
on back of magnetic mounting head.
8 EN
2. Slowly tighten twist lock for a
secure connection to the air vent.
4. Insert car charger into your
vehicle's power port.
*The iTap 2 Wireless Air Vent Mount
does not have an on/off switch.
Once the device is plugged into the
power source will stay on.
Wireless Charger Specifications
INPUT
CHARGING PORT
LENGTH
WIDTH
HEIGHT
WEIGHT
Car Charger Specifications
INPUT
OUTPUT
Charging Indicator
Solid Green Light
Blinking Red Light
DC 9.0V-1.67A
DC 5.0V-2.0A
MICRO USB
2.85"
2.6"
3.65"
3.8 oz
DC 12V–24V
DC 5V/3A
9V/2A
12V/1.5A
Smartphone is charging.
Smartphone is not charging.
Foreign object detected or the smartphone
is overheating.
9