Ebyte E870-W1 User Manual page 7

Chengdu Ebyte Electronic Technology Co., Ltd. E870-W1 User Manual
⑤ "Equipment model" select the previously created E870-W1 model, then enter the SN code on the back of the
device, fill in other parameters according to your needs, click "OK to add" to create the device.
⑥Restart the device, and when the STATE light of the device is always on, the device can be seen online on the
platform.
⑦Click "Device Operation and Maintenance" and "Online Debugging" on the platform, and click "Debug" behind
the device to enter the device debugging interface. Enter the corresponding command to control the device.
⑧Or click "Device Instance" and click "Device Details" of the online device, you can see the information of the
device data points in the device details, and you can read the data or operate the device on the interface.
Copyright © 2012 , Chengdu Ebyte Electronic Technology Co., Ltd. 7