Table of Contents
Advertisement
To turn color channels off and on:
1. From the PICTURE menu, use the Arrow buttons to highlight
Color Calibration and press the OK button. The COLOR
CALIBRATION menu is displayed.
2. Use the Arrow buttons to highlight Color Tuner, and then
press the OK button. The Color Tuner menu is displayed ..
Red
Green
Hue
0
0
Saturation
-1
5
Brightness
-24
0
Offset
0
0
Gain
0
0
3. Use the Arrow buttons on the remote to highlight Red,
Green, or Blue.
4. Press the OK button to turn the color channel off or on. An X
appears over a color channel that has been turned off.
5. Use the Arrow buttons to highlight another color channel to
turn off or on. Only two color channels can be turned off at
the same time.
6. When you are finished with the color channels, press the
BACK button to adjust additional settings or EXIT.
Color Tuner
Blue
Cyan
Magenta
Yellow
0
0
25
-14
-4
0
-2
0
-22
0
0
0
0
0
To adjust the 11 Point White Balance settings:
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the 11 Point White Balance menu is displayed.
Gain
5%
2. Use the Arrow buttons on the remote to highlight the Gain
and Color values you wish to adjust. Press the OK button
and use the Left/Right Arrow buttons to adjust the value.
When you are finished press the OK button to save the
setting.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
All changes here are saved to Color Temperature.
26
11 Point White Balance
Red
Green
Blue
0
0
0
Advertisement
Table of Contents
