Xmotos XB31 Operating Instructions Manual page 51

REAR SUSPENSION Cont.
NOTICE
DO NOT TRY TO REPAIR THE SHOCK.
IF REPAIR IS NECESSARY, TAKE THE
MOTORCYCLE TO AN XMOTOS DEALER.
BASIC MAINTENANCE PROCEDURES
HIGH SPEED DAMPING ADJUSTMENT (REAR)
1. The high speed damping can be adjusted by turning the
hexagonal portion of the compression adjuster
2. The high speed damping adjuster has 3 ½ turns or more.
3. To adjust to the standard position, turn the adjuster
clockwise until it will no longer turn (DO NOT FORCE).
This is the full hard
4. Turn the adjuster
turns. Slow setting
LOW SPEED DAMPING ADJUSTMENT (REAR)
1. The low speed damping can be adjusted by turning the
center screw
2. The low speed adjuster has 9 positions. Turning the
adjuster one full turn clockwise advances the adjuster
4 positions.
3. To adjust to the standard position, turn the adjuster
clockwise until it will no longer turn (DO NOT FORCE).
This is the full hard
4. Turn the adjuster
Slow setting
REBOUND DAMPING ADJUSTMENT (REAR)
1. The rebound damping adjuster
lower end of the shock absorber.
2. It has 12 positions. Turning the adjuster one full turn
advances the adjuster 4 positions.
3. Rebound damping can be increased by turning the
adjuster clockwise
4. To adjust to the standard position, turn the adjuster
clockwise until it will no longer turn (DO NOT FORCE).
This is the full hard
5. Turn the adjuster counter-clockwise 9-12 clicks.
51
setting
counter-clockwise 1 5/6
of the compression adjuster.
setting.
counter-clockwise 6 to 9 clicks.
is located at the
setting.
th _ 2 1/3 rd