Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety - Flex CL 5000 10.8/18.0 Original Operating Instructions

Contents
Symbols used in this manual . . . . . . . . . 10
Symbols on the power tool . . . . . . . . . . 10
For your safety . . . . . . . . . . . . . . . . . . . 10
Technical specifications . . . . . . . . . . . . 12
Overview . . . . . . . . . . . . . . . . . . . . . . . . 13
Instructions for use . . . . . . . . . . . . . . . . 14
Maintenance and care . . . . . . . . . . . . . . 16
Disposal information . . . . . . . . . . . . . . . 16
Exemption from liability . . . . . . . . . . . . . 16

Symbols used in this manual

WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Disposal information
(see page 16)!
Do not look into the light source!
Minimum distance from all
illuminated surfaces and objects.
There is a risk of the illuminated
objects overheating if the safe
distance violated.
10
CL 5000 10.8/18.0 / CL 10000 10.8/18.0
Rough service luminaires
Protection class III
(safety extra-low voltage)

For your safety

WARNING!
Before using the device, read and adhere to:
these operating instructions
-
the currently applicable operating
-
regulations and the accident prevention
regulations
This device reflects the latest state of
-
engineering development and was
designed in agreement with the
recognised safety regulations. However,
when being used the device may present
a risk to the health and life of the user or
third party or damage to the device or
other objects could ensue. The lamp may
only be used as intended and in
technically sound condition. Faults that
impair safety must be rectified
immediately.
Intended use
The battery-operated LED work lamp
CL 5000 10.8/18.0 / CL 10000 10.8/18.0 is
designed
- for commercial use in industry and trade,
- for targeted illumination of the workplace,
- for illuminating rooms.
The battery-powered LED work lamp
CL 5000 10.8/18.0 / CL 10000 10.8/18.0 is not
suitable
- for use as a headlight.