Table of Contents
Advertisement
4.15.3 Installation of shielded cables
In the case of clamp type A:
unscrew the screw until space is created for inserting the
shielding of the shielded cable A1)(Fig. 27);
insert the shielded cable with the shielding inside the
clamp A2);
screw in the screw until it is completely tightened on the
shielding A3).
Do not overtighten.
WARNING
In the case of clamp type B:
pull the indicated tabs upwards and lift until locked in the open
position B1)(Fig. 27);
insert the shielded cable with the shielding inside the
clamp B2);
put pressure on the indicated part until the clamp closes auto-
matically on the shielding B3).
A
A1
A2
A3
20131950
20120900
Installation
B
B1
B2
B3
Fig. 27
34
GB
Advertisement
Table of Contents
