Connecting A/V Equipment; Input From Device To; Output From Tv To Device - Polaroid TTM-2901L User Manual

INSTALLATION (continued)
Connecting A/V Equipment (continued)
The following are diagrams showing basic instructions for attaching external equipment, like a VCR or DVD player, to your
TV set. Please refer to operation manuals of external audio/video equipment that will be connected to your set for additional
instructions. PLEASE TURN OFF ALL POWER BEFORE CONNECTING DEVICES TOGETHER.
VCR
Input from Device to TV
Input from Device to TV
AUDIO/VIDEO IN
AUDIO/VIDEO IN
DVD Player
Camcorder
Camcorder
VCR

Output from TV to Device

AUDIO/VIDEO OUT
AUDIO/VIDEO OUT
VCR
The side terminals may be easier to use with a camcorder. The connections are identical.
Connect VCR's RF OUT terminal to the RF IN jack located on the rear panel of the TV.
Coaxial Cable
DO NOT use the DVD IN terminals and AV IN(3) terminals at the same time.
DO NOT connect both AV IN(1) and S-Video terminal. Use only one of the two. With DVD signal
input, there is no DVD video output. Also, remember to connect the audio cables when using
S-Video and DVD terminals.
With S - VIDEO Terminal
With S - VIDEO Terminal
VIDEO
VIDEO
AUDIO
AUDIO
YCbCr
YCbCr
VIDEO
VIDEO
AUDIO
AUDIO
8
RF IN