Table of Contents
Advertisement
DISASSEMBLY AND ASSEMBLY
(1) Remove two screws which secure the cover insulator *t to top plate.
(2) Remove the harness between heaters.
(3) Remove two screws for removing heater brackets.
(4) Remove heaters.
(5) Reverse the above steps for reassembly.
12. To remove convection part assembly
(1) Remove cover *b and cover insulator *b protecting convection part assembly. - release two lances of cover insulator *b.
(2) Remove four screws which secure the convection part assembly to the cavity rear plate.
(3) Remove a nut holding the convection fan and the pipe.
(4) Remove two screws which secure the bracket motor to cover insulator.
(5) Remove the cooling fan.
(6) Remove two screws which secure the motor shaded pole to the bracket motor.
(7) Reverse the above steps for reassembly.
17
Advertisement
Table of Contents
