Table of Contents
Advertisement
HP 1500 DMX Fogger
The high performance HP 1500 DMX Fogger has been designed to meet the rigorous demands of stage, touring
and installation use. The 'Immediate-Stop' patented technology will instantly stop the output of fog along with
avoiding fluid spitting from the nozzle. Its 3 litre tank enables long periods of use between refills, and control is
facilitated via the on-board panel or by DMX.
• 1 x 1500W heater
• Smoke output: approx. 20,000 cu.ft per minute
• Warm-up time: approx. 4 minutes
• Tank capacity: 3 litres
• DMX channels: 1
• Timer, manual and DMX modes
• 'Immediate-stop' technology
• Can be used vertically simulating a CO2 jet
• 4 push button menu with LCD display
• PowerCON input
• 3-Pin XLR input/output
• 5-Pin XLR input/output
• Use with water based fog fluid
(Order code: FLUI08)
Specifications
Power consumption
1500W (max.)
Power supply
220~240V, 50/60Hz
Fuse
F8A resettable breaker
Dimensions (H x W x D)
280 x 300 x 470mm
Weight
9.1kg
Order code
EQLED361
www.prolight.co.uk
Product overview & technical specifications
470mm
HP 1500 DMX Fogger User Manual
FULL
ADD FLUID
LOW
300mm
EXTREMELY HOT. DO NOT TOUCH COVER
OR LOOK DIRECTLY INTO THE OUTPUT NOZZLE.
KEEP AT LEAST 3m DISTANCE.
DO NOT OPERATE
WITHOUT EQUINOX FLUID
.
3
Advertisement
Table of Contents
