Dell OptiPlex 5060 Small Form Factor Service Manual page 57
Hide thumbs
Also See for OptiPlex 5060 Small Form Factor:
- Setup and specifications manual (31 pages) ,
- Service manual (77 pages)
Table of Contents
Advertisement
f
Heat sink
3
To release the PSU:
a
Disconnect the CPU power cable from the system board [1].
b Unroute the power cables from the retention clips on the chassis [2].
4
To remove the PSU:
a
Remove the 3 screws that secure the PSU to the system [1].
b Disconnect the system power cable from the connector on the system board [2].
c
Lift the cables away from the system [3].
d Press the blue release tab [4] at the rear end of the PSU unit, slide the PSU and lift it away from the system [5].
Removing and installing components
57
Advertisement
Table of Contents
Need help?
Do you have a question about the OptiPlex 5060 Small Form Factor and is the answer not in the manual?