Scan Information; Output Setting - Plustek OpticBook 3600 Plus User Manual

As the following picture shows, the DigiBook interface could be divided into two
parts. The left includes a view window where shows images, with a white area below
where indicates the scan information; the right pane of the interface provides scanning
settings, such as Output Setting, File Option, OCR Setting, and Mode Setting, for
achieving the best scan or transferred result.
Scanner
Information
View Window
Both previewed and scanned images will be displayed here. With a preview view,
there are three preview modes users can choose from: Color, Grayscale and Text. To
click any of these three buttons will switch the preview image between different modes,
allowing you to decide if current scan settings are appropriate or need adjustments. On
the other hand, with a scanned view, the button
of the view window. By clicking this button
satisfactory.

Scan Information

Below the view window displays a bar showing the scan status while processing
jobs. While you're scanning the image, the scan mode and the resolution will be listed.
When the scan is over, the information on scan mode, resolution, file size and
destination folder will be provided here.

Output Setting

File Format: stands for file style you prefer the scanned image(s) to be after
transfer processing, and is supported by the software you have installed in your
system. Such as:
View Window
shows up on the upper right corner
, you can delete the scanned images not
19