To Customize - Panasonic EP-MA8K Operating Instructions Manual

To customize

Changing the intensity of the air massage
When performing an air massage,
Adjust by pressing the
●
Intensity is displayed in 3 levels.
Adjusting the intensity of the massage
Back intensity can be adjusted by pressing on the "+" or "–" of the Back Intensity.
●
You can check the area that is currently being massaged in the display.
●
The intensity adjustment differs according to the course and action.
ㅡ There are 3 levels of intensity for the auto courses.
ㅡ Intensity for the manual operation is displayed in 5 levels.
Caution
Intensity might increase drastically when the intensity is increased in multiple levels.
Always increase the intensity one levels at a time, checking how it feels.
●
For safety reasons, it is designed not to increase the intensity drastically.
●
If you do not feel enough intensity even it is set to maximum, or you feel too much intensity even it is set to minimum:
<When it does not feel strong enough even the intensity for auto courses is set to maximum>
You can massage with greater intensity by reclining the backrest and making use of your body weight.
<When it feels too strong even if the intensity for auto courses is set to minimum>
Pressure of the massage heads will soften by placing a cloth or blanket between the backrest and your body.
Also, if the intensity of the massage around your lower back is too strong, you can make it feel lighter by
pressing the "腰部" button for the Air Massage to release the air around the lower back.
"温热" massage
You can turn off/on the "Heat" massage heads by
pressing .
Flashing: Warming up "Heat" massage heads.
Lit: "Heat" massage heads are on.
Off: "Heat" massage heads off.
ㅡ Temperature cannot be adjusted.
ㅡ Sense of warmth from the massage heads will differ
depending on your body shape, massage area, massage
action, clothing, and ambient temperature.
The warm section in the "Heat" massage heads will warm up
the fabric of the massage areas.
●
Heat function cannot be used alone.
●
Sense of warmth differs depending on the room
temperature, clothing, body shape, action, position, and
course; this is not a malfunction.
■ To turn OFF each time
Register "温热" as OFF in the memory.
For adjusting the reclining angle and legrest
Press to adjust.
EN32
button.
●
When holding down the adjustment buttons, chair adjustment will continue
until you hear the limit sound (beep-beep-beep).
●
There may be a slight delay before the legrest starts moving.
●
Armrests will move in conjunction with the reclining of the backrest.
"Heat" massage heads "Heat" massage heads
warm section warm section
"Heat" massage heads
rubber section