Introduction; Product Improvement - Mec Purair 80 User Manual

The Purair 80 contains all the pneumatic circuitry, required to remove
anaesthetic gases from an anaesthesia system fitted with an appropriate
air break receiving unit system and dispose of them diluted with air to a
safe appropriate place of
The Purair80 machine is designed to comply with:
BS EN ISO 7396-2 2007, Medical gas pipeline systems Part 2: Anaesthetic
gas scavenging disposal systems
BS EN 60601-1-2:2015,
requirements for basic safety and essential performance.
Collateral standard. Electromagnetic compatibility. Requirements
and tests
BS EN 60601-1:2006+A12:2014 Medical electrical equipment. General
requirements for basic safety and essential performance
PA80 is a registered trademark of MEC Medical Limited .
Other brand names or product names used in this manual are trademarks
or registered trademarks of their respective holders.
MEC Medical Ltd. has a policy of continued product improvement and
therefore reserves the right to make changes which may affect the
information contained in the manual without giving prior notice.
MEC Medical Ltd

Introduction

discharge.
Medical electrical equipment. General

Product Improvement

Page 4 of 16
P80UM
Issue 11
20/03/2016