Periodic maintenance and adjustment
Turn signal light bulb
If a turn signal light does not come on,
have a Yamaha dealer check its electri-
cal circuit or replace the bulb.
6
EAU61170
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screw.
1. License plate light unit
2. Screw
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
1. License plate light bulb socket
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit by
installing the screw.
6-33
EAUM3510
1
2
1