Advertisement
Quick Links
ASSEMBLY
WHITE BED 90CM
INSTRUCTIONS
Approximate Assembly Time
People Required to Assemble
Tools Required
1:30hrs
Before you start....
Please carefully unpack and lay out all of the component parts to ensure nothing
is missing and to check each component for any obvious damage.
Should you identify any concerns at this stage please contact the retailer from
whom this product was purchased. Please quote your order number, details of
your issue, the product code, and the batch number from the cartons which will
help to resolve your issue as quickly as possible.
Version Number - 1.0
Product Code - HOR002
Advertisement
Related Manuals for Julian Bowen Limited HOR002
Summary of Contents for Julian Bowen Limited HOR002
- Page 1 Please quote your order number, details of your issue, the product code, and the batch number from the cartons which will help to resolve your issue as quickly as possible. Version Number - 1.0 Product Code - HOR002...
- Page 2 Contact Retailer...
- Page 3 Please check all hardware matches the list below. Should you notice any are missing please contact your retailer. 6.35 x 70 mm 7.0 x 50 mm 10 x 40 mm 8.0 x 25 mm 8.0 x 35 mm 11002 9.2 cm 8.4 cm 22.5 cm 3.5 x 16 mm...
- Page 4 PARTS Please ensure you carefully check all the pieces, should you have any concerns please contact the retailer before assembly commences. Pelase have your order number, details of the issue, the product code, and the batch number from the cartons as this will help us to resolve your issue much faster.
- Page 5 ASSEMBLY ADVISE Please take the time to carefully read through these instructions before you commence. Keep these instructions for furure reference. We advise that the product is assembled in the room it is intended for. We advise that you keep the hardware in a bowl during assembly to avoid losing anything.
- Page 6 10 x 40 mm 6.35 x 70 SOFT 17 SCA CREME...
- Page 7 Attach the centre slat first by pushing the side rails together so that the slat is flush against the side rail, before inserting the screws. 4.0 x 30 mm 03 03 Next attach the remaining slats. Place the slats onto the side rail supports and distribute evenly by using the spacer provided.
- Page 8 8.0 x 25 mm 4.0 x 30 mm...
- Page 9 04 L 11002 3.5 x 16 mm 4.0 x 30 mm...
- Page 10 02 02 T 7.0 x 50 mm 4.0 x 30 mm 4.5 x 50 mm SOFT 17 SCA CREME 4.0 x 30 mm...
- Page 11 22.5 cm 3.5 x 20 mm 4.0 x 30 mm...
- Page 12 8.0 x 35 mm...
- Page 13 Attach the centre slat first by pushing the side rails together so that the slat is flush against the side rail, before inserting the screws. 4.0 x 30 mm 03 03 Next attach the remaining slats. Place the slats onto the side rail supports and distribute evenly by using the spacer provided.
-
Page 15: General Care And Maintenance
GENERAL CARE & MAINTENANCE We advise that when cleaning the product that a damp cloth is used. Avoid the use of all household cleaners and abrasive. Never push or drag the furniture. Never attempt to move the furniture when fully loaded. We advise that periodically all fixings are re-tightened.
Need help?
Do you have a question about the HOR002 and is the answer not in the manual?
Questions and answers