LaserLiner CompactPlane-Laser 3G Operating Instructions Manual page 22

Data transfer
This device has digital connectivity which allows wireless data transfer to
mobile devices such as smart phones or tablets with a wireless interface.
The system prerequisites for a digital connection are specified at
https://info.laserliner.com/?an=ble
This device can generate a wireless connection to devices which are compatible
with the wireless standard IEEE 802.15.4. The wireless standard IEEE 802.15.4
is a transfer protocol for Wireless Personal Area Networks (WPAN). The range
is set to a maximum distance of 10 m from the terminal device and greatly
depends on the ambient conditions such as the thickness and composition of
walls, sources of interference as well as the transmit / receive properties of the
terminal device.
Application (app)
An app is required to use the digital connection You can download the app
from the corresponding stores for the specific type of terminal device:
!
Make sure that the wireless interface of the mobile device is activated.
After starting the app and activating the digital connection, a connection
can be set up between a mobile device and the measuring device.If the
app detects several active measuring devices, select the matching device.
This measuring device can be connected automatically the next time it is
switched on.
Additional functions via the app
The app offers a range of additional functions. If it is not possible to control
your device via the app for technical reasons, reset the device to the factory
settings by switching it off and back on again so that you can continue to use
the regular functions without problems.
22
EN