Noise Information; Vibration Information - Worx WP808E X Series Manual

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K
pA
Wear ear protection

VIBRATION INFORMATION

Typical weighted
vibration
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
Cordless shrub shear /
grass shear / weeder
L : 66dB(A)
pA
L :82dB(A)
wA
3.0dB(A)
a <3.6m/s
2
h
uncertainty K=1.5m/s²
OPERATION INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
INTENDED USE
The product is intended for light trimming of shrubs
and lawn edges in domestic use.
ASSEMBLY & OPERATION
ACTION
ASSEMBLY (Fitting/Changing the
blade)
Removing the blade
WARNING: Wear gloves when
changing the blade.
Fitting the blade
Fitting and removing the weeder blade
BEFORE OPERATION
Checking the battery condition
NOTE: Fig. C1 only applies for the battery
pack with battery indicator light.
Charging the battery pack
More details can be found in charger's
manual
Installing the battery pack
Removing the battery pack
OPERATION
Starting& Stopping
Trimming grass
NOTE: Keep the tool away from hard
objects and delicate plants. To make a
closer cut, slightly tilt the tool.
Trimming hedges and shrubs
NOTE: Take care to avoid any foreign
objects. Especially avoid hard objects
such as metal wire and railings, as these
could damage the blades.
Weeding grass
Note: To ensure efficient operation,
blade cleaning should be performed
in time after each work.
Operating with the telescopic handle
FIGURE
See Fig.
A1, A2
See Fig.
B1, B2
See Fig. B3,
B4
See Fig. C1
13
See Fig. C2
See Fig. C3
See Fig. C4
See Fig. D
See Fig. E
See Fig. F
See Fig. G
EN