Table of Contents
Advertisement
Quick Links
Axis 0936-001: F44 - User Manual
Manufacturer: Axis Communications
Product Type: Dual Audio Input Main Unit
Manufacturer Part Number: 0936-001
Model #: F44
General Information
UPC: 07331021054141
•
UNSPSC: 46171610
•
Harmonization Code: 8525501000
•
Product Series: F
•
Connectivity Technology: Wired
•
Recording Formats: Full HD
•
Related Links (Right click to open in new tab)
Visit the
0936-001 | F44
View
over 1170 other Axis products
View list of all the
other manufacturers
# Require Multiple Quantities? Email us for Bulk Pricing
Scroll down to view the Axis 0936-001 | F44 Product Data Sheet
product page for detailed information
we carry
Advertisement
Table of Contents
Related Manuals for Axis 0936-001
Summary of Contents for Axis 0936-001
- Page 1 View over 1170 other Axis products View list of all the other manufacturers we carry # Require Multiple Quantities? Email us for Bulk Pricing Scroll down to view the Axis 0936-001 | F44 Product Data Sheet...
- Page 2 AXIS F44 Dual Audio Input Main Unit User Manual...
- Page 3 US and other Battery countries. The Axis product uses a 3.0 V BR2032 lithium battery as the power This product contains licensed third-party software. See the menu item supply for its internal real-time clock (RTC). Under normal conditions “About”...
- Page 4 • find answers to resolved problems in the FAQ database. Search by product, category, or phrase • report problems to Axis support staff by logging in to your private support area • chat with Axis support staff •...
-
Page 5: Table Of Contents
AXIS Media Control (AMC) ........ - Page 6 AXIS F4005-E Dome Sensor Unit ........
-
Page 7: Hardware Overview
AXIS F44 Dual Audio Input Main Unit Hardware Overview Hardware Overview Control button SD card slots LEDs (Power, Status, Network) RJ12 connector (4x) Audio in Audio out I/O connector Power connector Network connector (PoE) 10. RS232 connector 11. Plastic bottom plate Connectors and Buttons For technical specifications, see page 59. -
Page 8: Led Indicators
Resetting the product to factory default settings. See page 54. • Connecting to an AXIS Video Hosting System service. See page 46. To connect, press and hold the button for about 3 seconds until the Status LED flashes green. •... -
Page 9: Shorten Sensor Unit Cable
AXIS F44 Dual Audio Input Main Unit Hardware Overview Amber Steady during startup. Flashes when restoring settings. Flashes red for firmware upgrade failure. Note The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to Setup > System Options >... - Page 10 AXIS F44 Dual Audio Input Main Unit Hardware Overview...
-
Page 11: Access The Product
To view streaming video in Internet Explorer, allow installation of AXIS Media Control (AMC) when prompted. The Axis product includes one (1) H.264 decoder license for viewing video streams and one (1) AAC audio license. The licenses are automatically installed with AMC. The administrator can disable the installation of the decoders to prevent installation of unlicensed copies. -
Page 12: Set The Root Password
See also Capture Mode on page 20. Set Power Line Frequency Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 54) or by resetting the product to factory default. - Page 13 Manual Trigger on page 12. Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.
- Page 14 Access the Product AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC) on page 14 for more information. The toolbar displays the following buttons: The Play button connects to the Axis product and starts playing a media stream.
-
Page 15: Media Streams
Note also that all multicast viewers count as one unicast viewer in the maximum total of 10 simultaneous connections. AXIS Media Control negotiates with the Axis product to determine the transport protocol to use. The order of priority, listed in the AMC Control Panel, can be changed and the options disabled, to suit specific requirements. -
Page 16: Alternative Methods Of Accessing The Video Stream
AXIS F44 Dual Audio Input Main Unit Media Streams The AMC Control Panel can be used to configure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control Panel is automatically installed on first use, after which it can be configured. Open the AMC Control Panel from: •... -
Page 17: Access Audio Streams
• The Axis product supports QuickTime 6.5.1 and later. • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. -
Page 18: Set Up The Product
Set Up the Product Set Up the Product The Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. •... -
Page 19: Video And Audio
Width and Height fields and click Apply. • When accessing the Live View page in Internet Explorer with AXIS Media Control (AMC) in Windows. Right-click in the image and select Pixel counter. Use the mouse to move and resize the rectangle. - Page 20 Maximum frame rate. To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed amount. Alternatively, the frame rate can be set as Unlimited, which means the Axis product always delivers the highest frame rate possible under the current conditions.
-
Page 21: Stream Profiles
H.264 video. The bit rate controller built into the product can be combined with Zipstream to enforce a maximum bit rate (MBR) limit. Axis Communications recommends using VBR or MBR with a rather high bit rate limit to enable the full potential of Axis’ Zipstream Technology. - Page 22 To change this setting go to Setup > Video & Audio > Camera Settings White balance is used to make colors in the image appear the same regardless of the color temperature of the light source. The Axis product can be set to automatically identify the light source and compensate for its color. Alternatively, select the type of light source from the drop-down list.
-
Page 23: Privacy Mask
The shutter and gain settings affect the amount of motion blur and noise in the image. To adapt to different lighting, available storage space and bandwidth, it is often necessary to prioritize either low motion blur or low noise. The Axis product allows using different prioritization in normal light and in low light. -
Page 24: Quad Stream
AXIS F44 Dual Audio Input Main Unit Video and Audio The Privacy Mask List (Video & Audio > Privacy Mask) shows all the masks that are currently configured in the Axis product and indicates if they are enabled. You can add a new mask, re-size the mask with the mouse, choose a color for the mask, and give the mask a name. - Page 25 An overlay image is a static image superimposed over the video stream. The image, for example a company logo, is first uploaded to the Axis product and then used to provide extra information or to mask a part of the image.
-
Page 26: Set Up Audio
The Axis product supports the following audio modes: • Full duplex – Simultaneous two-way audio allowing the Axis product to transmit and receive audio at the same time. There is no echo cancellation; if feedback loops appear, try moving the microphone or the speaker. - Page 27 • Half-duplex – Audio can be transmitted to and from the Axis product but only in one direction at a time. To transmit audio using the Live View page, use the Talk and Listen buttons, see AMC Audio Controls on page 13.
-
Page 28: Audio Clips
To add, download, modify or remove audio clips, go to Video & Audio > Audio Clips. For more information see the online help To configure the Axis product to play audio clips when an event occurs, an action rule must be set up. For more information, see Events on page 35. -
Page 29: Configure The Live View Page
Viewer Settings To configure options for the viewer, go to Live View Config > Viewer Settings. • Select Show viewer toolbar to display the AXIS Media Control (AMC) or the QuickTime viewer toolbar under the video image in your browser. •... - Page 30 Defining the link as a web link will open the link in a new window. Output Buttons External I/O devices connected to the Axis product’s output ports can be controlled directly from the Live View page. To display output buttons in the Live View page: 1.
-
Page 31: Detectors
AXIS F44 Dual Audio Input Main Unit Detectors Detectors About camera tampering Camera Tampering can generate an alarm when the camera is repositioned, or when the lens is covered, spray-painted or severely de-focused. To send an alarm such as by way of email, an action rule must be set up. - Page 32 AXIS F44 Dual Audio Input Main Unit Detectors Once motion detection windows are configured, the Axis product can be configured to perform actions when motion is detected. Possible actions include uploading images and start recording. For more information, see Set Up Action Rules on page 35.
-
Page 33: Audio Detection
Audio Detection The Axis product can be configured to generate an alarm when audio rises above or falls below the threshold value. The threshold value can be set in the range 0–100 where 0 is the most sensitive and 100 the least sensitive. -
Page 34: Applications
Manual installation — obtain the license key from the application vendor and upload the key to the Axis product To request a license, the Axis product serial number (S/N) is required. The serial number can be found on the product label and under System Options >... - Page 35 AXIS F44 Dual Audio Input Main Unit Applications If the Axis product is reset to factory default, uploaded applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings on page 54.
-
Page 36: Events
Events The Event pages allow you to configure the Axis product to perform actions when different events occur. For example, the product can start a recording or send an email notification when motion is detected. The set of conditions that defines how and when the action is triggered is called an action rule. - Page 37 Recording – Triggers the rule when the Axis product records to the storage device. The recording status trigger can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped to record to the storage device.
-
Page 38: Add Recipients
Secure (HTTPS). Send Notification Specify login information for the HTTPS server and validate Send Video Clip the server’s certificate. If there is a proxy between the Axis product and the HTTPS server, also specify the proxy settings. Network Share Send Images A network share can also be used as a storage device for recorded video. -
Page 39: Create Schedules
Optionally, select Use encryption to send emails over an encrypted connection. The server certificate can be validated using the certificates available in the Axis product. For information on how to upload certificates, see About certificates on page 43. -
Page 40: Recordings
Note The recording’s start date and time is set according to the Axis product’s date and time settings. If the Axis product is configured to use a time zone different from the local time zone, make sure to configure the Recording time filters according to the product’s time zone. -
Page 41: Export Video Clip
Continuous Recording The Axis product can be configured to continuously save video to a storage device. For information about storage devices, see Storage on page 50. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings. -
Page 42: Languages
Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the file and click the Upload Language button. -
Page 43: System Options
IP address filtering is enabled on the System Options > Security > IP Address Filter page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering. - Page 44 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired protocol, in the address field in a browser, enter https:// for the HTTPS protocol and http:// for the HTTP protocol.
-
Page 45: Date & Time
2. Click Install certificate and upload the certificate. Audio Support Select Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configure audio settings, see Set Up Audio on page 25. -
Page 46: Network
IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic. - Page 47 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar. 6. Open a browser and type http://<IP address> in the Location/Address field. For other methods of assigning the IP address, see the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup Note •...
- Page 48 Host Name Configuration The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.
- Page 49 (LAN) from the public network (Internet). Use NAT traversal when the Axis product is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router.
- Page 50 Note All AXIS Video MIB traps are enabled when SNMP v1/v2c traps are enabled. It is not possible to turn on or off specific traps. SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.
-
Page 51: Storage
To prevent corruption of recordings, the SD card should always be unmounted before it is ejected. The SD card is automatically mounted when the card is inserted into the Axis product or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted. - Page 52 Formatting the SD card will remove all data and recordings stored on the card. The Axis product can be configured to automatically format SD cards that are inserted into the product. If autoformat is enabled and an SD card is inserted, the product will check if the SD card has the ext4 file system. If the card has a different file system, the card will automatically be formatted to ext4.
-
Page 53: Ports & Devices
The Axis product provides several maintenance functions. These are available under System Options > Maintenance. Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. -
Page 54: Support
For more information, see www.axis.com/developer File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, go to System Options > Advanced > File Upload. Uploaded files are accessed through http://<ip address>/local/<user>/<file name> where <user> is the... -
Page 55: Reset To Factory Default Settings
System Options Plain Config Plain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from this page. To open Plain Config, go to System Options > Advanced > Plain Config. Axis Support does not provide assistance. -
Page 56: Troubleshooting
The latest version may contain a correction that fixes your particular problem. The current firmware version in the Axis product is displayed in the page Setup > Basic Setup and in Setup > About. - Page 57 Axis product. Check all cabling and reinstall the product. Possible IP address conflict The static IP address in the Axis product is used before the DHCP server sets a dynamic address. with another device on the...
- Page 58 Set a Capture Mode that prioritizes frame rate. Changing the capture mode to prioritize frame rate will lower the maximum resolution. See Capture Mode on page 20. The maximum frames per second is dependent on the utility frequency (60/50 Hz) of the Axis product. See Technical Specifications on page 59.
- Page 59 AXIS F44 Dual Audio Input Main Unit Troubleshooting Distorted audio Check that the correct Audio Input source is selected under Setup > Video & Audio > Audio Settings. Feedback loops Feedback loops might appear in full-duplex mode. Try moving the microphone or the speaker, or use half-duplex mode instead.
-
Page 60: Technical Specifications
G.711 PCM 8 kHz 64 kbit/s G.711 PCM 16 kHz 128 kbit/s G.726 ADPCM 8 kHz 32 kbit/s or 24 kbit/s Configurable bit rate Audio External microphone or line input (2 microphone or line inputs with included AXIS Stereo-to-mono Adapter) input/output Line output Network Security Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X... - Page 61 AXIS F8002 DIN Rail Clip AXIS T8120 15 W Midspan 1-port AXIS T83 Microphones Video AXIS Camera Companion, AXIS Camera Station, Video management software from Axis’ Application Development management Partners available on www.axis.com/techsup/software software Warranty Axis 3-year warranty and AXIS Extended Warranty option, see www.axis.com/warranty...
-
Page 62: Technical Specifications For Sensor Units
AXIS F8204 Mounting band Mounting bracket for AXIS P1214/P1214-E/P1224-E Warranty Axis 3-year warranty, see www.axis.com/warranty AXIS F1005-E Sensor Unit Models AXIS F1005-E 3 m / 10 ft. cable: Standard, IP66/IP67-rated AXIS F1005-E 12 m / 39 ft. cable: Standard, IP66/IP67-rated... -
Page 63: Axis F1015 Sensor Unit
AXIS F8203 Fixed Mount Bracket accessories AXIS F8204 Mounting Band AXIS F8205 Bullet Accessory AXIS F8212 Trim Ring AXIS F8401 Clear Lens Protector Warranty Axis 3-year warranty, see www.axis.com/warranty AXIS F1015 Sensor Unit Models AXIS F1015 3 m / 10 ft. cable: Varifocal... -
Page 64: Axis F1025 Sensor Unit
AXIS F44 Dual Audio Input Main Unit Technical Specifications AXIS F1015 12 m / 39 ft. cable: Varifocal Camera Image sensor 1/2.8” (effective) progressive scan RGB CMOS Lens Fixed iris 3-6 mm, F2.0 With AXIS F34/F41/F44 in 1080p: Horizontal angle of view: 108° to 53°... -
Page 65: Axis F1035-E Sensor Unit
AXIS F8225 Pinhole Accessory AXIS F9201 Black/Silver Height Strip Housing Warranty Axis 3-year warranty, see www.axis.com/warranty AXIS F1035-E Sensor Unit Models AXIS F1035-E 3 m / 10 ft. cable: Fisheye, IP66/IP67-rated AXIS F1035-E 12 m / 39 ft. cable: Fisheye, IP66/IP67-rated... -
Page 66: Axis F4005 Dome Sensor Unit
Vertical angle of view: 66° Resolutions Max. 1920x1200/1080 Wide dynamic WDR – Forensic Capture range With AXIS F41: 1080p, 25/30 fps (50/60 Hz) With AXIS F44: 720p, 12.5/15 fps (50/60 Hz) Minimum Color: 0.3 lux illumination Shutter time With AXIS F34/F44: HDTV 720p 25/30 fps: 1/28000 s to 2 s 1080p 12.5/15 fps: 1/22500 s to 2 s... -
Page 67: Axis F4005-E Dome Sensor Unit
Vertical angle of view: 41° Resolutions Max. 1920x1200/1080 Wide dynamic WDR – Forensic Capture range With AXIS F41: 1080p, 25/30 fps (50/60 Hz) With AXIS F44: 720p, 12.5/15 fps (50/60 Hz) Minimum Color: 0.3 lux illumination Shutter time With AXIS F41: HDTV 1080p 25/30/50/60 fps: 1/143000 s to 2 s;... - Page 68 Vertical angle of view: 40° Resolutions Max. 1920x1200/1080 Wide dynamic WDR – Forensic Capture range With AXIS F41: 1080p, 25/30 fps (50/60 Hz) With AXIS F44: 720p, 12.5/15 fps (50/60 Hz) Minimum Color: 0.3 lux illumination Shutter time With AXIS F41:...
-
Page 69: Connectors
AXIS F44 Dual Audio Input Main Unit Technical Specifications Connectors I/O Connector 6–pin terminal block For an example diagram, see Connection Diagrams on page 68. Function Notes Specifications 0 V DC 0 V DC (-) DC output Can be used to power auxiliary equipment. -
Page 70: Performance Considerations
Ground Line out (mono) SD Card Slot The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use ultra-high speed SD cards (SDHC UHS-I or SDXC UHS-I). Performance Considerations When setting up your system, it is important to consider how various settings and situations will affect performance. Some factors affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both. - Page 71 Heavy network utilization due to poor infrastructure. Bandwidth affected. • Viewing on poorly performing client computers lowers perceived performance. Frame rate affected. • Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the frame rate and the general performance.
- Page 72 User Manual Ver. M1.3 AXIS F44 Dual Audio Input Main Unit Date: June 2016 © Axis Communications AB, 2016 Part No. 1590104...
Need help?
Do you have a question about the 0936-001 and is the answer not in the manual?
Questions and answers