Table of Contents
Advertisement
3.3.2.2 Linux
Step 1: Copy or download the image directly to a Linux machine.
Step 2: Create a bootable USB, then follow the steps shown.
Note: Use at least 8GB USB drive and ensure there are no important files inside the USB
drive. If there is insufficient space, please store the data in via alternative storage or
reformat the drive.
Open Startup Disk Creator
•
Select the .iso image
•
Click on Make Startup Disk
•
3.3.3
Installing Ubuntu
Follow the on-screen instructions. It is best to install the Ubuntu image on a clean hard
disk. If there are partitions from an existing image, please partition accordingly and
decide whether to install the image alongside the existing image or erase the existing
image prior to installing the new Ubuntu image.
3.3.3.1 System Setup
For remote access, install the openssh-server via command, sudo apt-get install
openssh-server.
Get the system IP address by using command ifconfig
•
Use any remote access software (PuTTy, Mobaxterm, VS Code, etc.) to access
•
the system remotely
To access the system with display, software such as
•
installed on remote system and user machine
Chapter 3 – Hardware & Software Installation Guide
NoMachine
can be
24
Advertisement
Table of Contents
