Table of Contents
Advertisement
O
perations
Operating instructions
1. Check to see if the shake-out bag is securely
attached to the base and upper cord wrap
on the unit. The silver clasp that slides onto
bag to secure it should be placed evenly on
bag to avoid any air leaks.
2. Plug cord into an electrical outlet.
3. Adjust the carpet height by turning round
knob near the foot of the vacuum to the
carpet height that best suits the carpet area
you are going to clean.
4. Step on the power switch located on top of
the heavy-duty metal hood. Press down with
foot and power will go on. Step again on the
switch and power will shut off.
5. To detent the handle, push on the foot
pedal. Press down on it again and handle
will detent almost to floor level.
6. You can now begin to vacuum.
NOTE: Always wrap cord around
cord hooks and fasten cord to
prevent unwinding.
6
w w w . b i s s e l l c o m m e r c i a l . c o m
WARNING:
To avoid injury, keep loose
clothing, hair, fingers, and all
other parts of body away from
any moving part (such as the
revolving brush). Turn off the
switch and unplug the cleaner
before changing the cleaner
height setting.
1 - 8 5 5 - 5 4 4 - 7 3 3 6
Advertisement
Table of Contents
