Advertisement
Introduction
The Trane touch-screen wall sensor is easily installed and configured with multiple options. It is designed to
communicate with HVAC equipment installed in a commercial environment that use the UC400, ReliaTel™, or
Symbio™ 800 control system.
Keep this user guide in an accessible area for reference.
Warnings, Cautions, and Notices
Safety advisories appear throughout this manual as required. Your personal safety and the proper operation
of this machine depend upon the strict observance of these precautions.
The three types of advisories are defined as follows:
Take Precautions During Installation!
If replacing an existing sensor, label the wires before removal. Electronic controls are
static-sensitive devices. Properly discharge yourself before manipulating and installing
the sensor.
Protecting the System!
All sensors are designed for use as operating units only and are not safety devices.
Tampering with the device or unintended application of the device will void the warranty.
Copyright
This document and the information in it are the property of Trane and may not be used or reproduced in whole
or in part, without the written permission of Trane. Trane reserves the right to revise this publication at any time
and to make changes to its content without obligation to notify any person of such revision or change.
Trademarks
All trademarks referenced in this document are the trademarks of their respective owners.
©2020 Trane
Indicates a potentially hazardous situation which, if not avoided, could result
WARNING
in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result
CAUTION
in minor or moderate injury. It could also be used to alert against unsafe
practices.
Indicates a situation that could result in equipment or property-damage only
NOTICE
accidents.
CAUTION
CAUTION
BAS-SVU040G-EN
Advertisement
